Skip to content
Open in AI

Vector Workflow Guide ​

Devices running CANmeleon VN16xx firmware (VN1610 / VN1640A) connect to Windows tools through Vector Driver Setup and physical hardware channels. Use physical channels directly in CANoe, CANalyzer, CANape, and Vector XL Driver Library (vxlapi) without virtual-channel forwarding or external bridge utilities. Available VN1610 and VN1640A operating modes, channel counts, and bus types depend on the hardware model, firmware version, and applicable hardware and software licenses.

  1. Install or switch to Vector VN16xx firmware in CANmeleon device manager, and verify the active VN1610 or VN1640A mode.
  2. Complete Vector driver installation and confirm the installed driver version and physical channels in Windows Device Manager and Vector Hardware Manager / Vector Hardware Config.
  3. Follow the CANoe Quick Start to map application channels to Vector physical channels; select the corresponding physical channels in CANalyzer or CANape as well (requires the relevant Vector software license).
  4. For custom tools and test automation, build against the Vector XL Driver Library (vxlapi).

Guides in This Section ​

CategoryGuideSummary
DriverInstall the Vector Driver for VN16xxDownload Vector Driver Setup, install the driver for the active firmware mode, and verify physical channels
SoftwareCANoe Quick StartCreate a configuration, map physical channels, set CAN / CAN FD bitrates, and verify frames with IG and Trace
DevelopmentVector XL Driver Library (vxlapi)Configure C/C++, C#, or python-can projects, set CAN FD bit timing, and handle event-driven reception

Key Capabilities ​

  • Direct physical channels: Connects via Vector Driver Setup so Vector tools and XL Driver Library applications select physical channels directly without bridge software.
  • Hardware timestamps: Supplies hardware-generated frame timestamps rather than host OS software-forwarding timestamps (see VN16xx firmware specifications for details).
  • Error frames and bus load: Exposes CAN / CAN FD error frames and bus-load metrics supported by the active firmware and Vector software channel.

Issue Feedback ​

To report a firmware issue or request a feature, open an issue on GitHub or Gitee with your hardware model, firmware version, Vector driver version, Windows build, software version, and bus settings.

CANmeleon · USB-CAN / CAN FD Hardware, Firmware & Solutions

Image preview0 × 0 px
100%
Click backdrop or press Esc to return