Skip to content
Open in AI

ETAS ES582 User Guides ​

This section covers Windows setup, INCA traffic verification, and BOA development for CANmeleon devices running ETAS ES582 firmware (ES582.1). Typical engineering workflows connect to ETAS INCA over CAN or CAN FD for ECU calibration and diagnostics via XCP/CCP, or exchange frames directly through BOA / EBI.

  1. Follow ES582 Windows Driver Setup to install the ES582 USB driver, BOA EBI Distribution Package, and the project-required Hardware Service Pack (HSP), then verify device detection in Windows Device Manager.
  2. Follow Send and Receive CAN Frames in INCA to search for hardware, receive traffic with CAN-Monitoring, and transmit frames with CAN-Output.
  3. Once manual communication is verified, integrate custom host applications or test scripts using ES582.1 BOA Development.

Guides in This Section ​

CategoryGuideSummary
DriverES582 Windows Driver SetupInstall the ES582 USB driver, HSP, and BOA EBI runtime, and verify driver versions
SoftwareSend and Receive CAN Frames in INCAConfigure INCA workspaces, hardware discovery, CAN-Monitoring reception, and CAN-Output transmission
DevelopmentES582.1 BOA DevelopmentPrepare the BOA / EBI development environment, SDK headers, and architecture-matched toolchains

Screenshot Reference Version

Screenshots in this section were captured with ES582.1 and INCA V7.2.10 (Chinese UI). Menu labels and version numbers vary across INCA, HSP, and driver releases; follow your project's software delivery package and official ETAS compatibility notes.

Official Resources & Feedback ​

CANmeleon · USB-CAN / CAN FD Hardware, Firmware & Solutions

Image preview0 × 0 px
100%
Click backdrop or press Esc to return